NANOTHERM

Press

22
SEP
2017

Cambridge Nanotherm at Productronica in November

Cambridge Nanotherm, producer of innovative nanoceramic thermal management technology for LEDs and electronics, today announces it will have a stand at this year’s productronica fair in Munich from 14­–17th November. Cambridge Nanotherm will be exhibiting its thermal management...
20
JUN
2017

Cambridge Nanotherm partners with Inabata for global sales and distribution

Partnership with Japanese distribution giant brings significant sales and distribution channel to thermal management specialists Inabata on track to bring Nanotherm’s unique thermal management solution to a wide range of global markets Cambridge Nanotherm, producer of innovative...
22
MAY
2017

Cambridge Nanotherm launches Nanotherm DMS for UV LED applications

Thermal management innovator Cambridge Nanotherm today announces the launch of Nanotherm DMS, a unique Direct Metallised Single-sided thermal management solution that addresses the challenges created by UV LED modules. Ultraviolet (UV) light has key applications for curing resins...
05
APR
2017

Nanotherm presenting at LED Professional Symposium

Our roving applications manager, Dr Giles Humpston, will be presenting a paper called: “Thermal Management for Chip-Scale Packaged Lighting Modules” at the LED Professional Symposium in Bregenz, Austria, disusing the opportunities and thermal challenges presented by...
30
JAN
2017

Nanotherm LC solves the thermal management challenge of CSP LEDs

Thermal management innovator Cambridge Nanotherm today announces how its Nanotherm LC thermal management solution addresses the unique needs of chip-scale packaged (CSP) LEDs. CSP LEDs have a number of benefits over traditional high-power LEDs (HP LEDs), giving module designers...
24
NOV
2016

Cambridge Nanotherm offers Six Sigma PCB manufacturing with Elvia PCB Group

Thermal management specialist Cambridge Nanotherm has introduced a Six Sigma PCB fabrication route with partner Elvia PCB Group. Aimed at the most demanding and heavily regulated industries such as aerospace and automotive, applying the Six Sigma process ensures 99.99966% of all...
03
NOV
2016

Cambridge Nanotherm expands manufacturing capability to enable a new generation of high power LED designs

Thermal management specialist Cambridge Nanotherm today announced that it has built significant additional capability and capacity into its MCPCB manufacturing base to meet rising demand for its award winning thermal management solutions. The company has established partnerships...
04
AUG
2016

Nanotherm launches 100um through-hole via technology

The technology development enhances Nanotherm DM’s position as the leading substrate choice for high-brightness LED packaging applications. Cambridge Nanotherm, a producer of innovative Nanoceramic thermal management technology for LEDs, has launched ‘Nanotherm DMTH‘...
05
APR
2016

Cambridge Nanotherm appoints LED expert Jed Dorsheimer to board of directors

Cambridge Nanotherm, producer of innovative nanoceramic thermal management technology, today announces the appointment of solid-state lighting expert Jed Dorsheimer to the company’s board of directors. Dorsheimer’s role as Managing Director of Equity Research, Display and...

In the News

07
NOV
2017

UV Community | Why the UV Industry Needs Nanoceramic Thermal Management

For decades UVA curing used high-intensity discharge (HID) UVA lamps. Only recently has the industry seen LED alternatives come to the fore. Compared to HID lamps, LED form factors are smaller and less fragile, while operationally they use less power, run cooler, and power cycle...
24
OCT
2017

eeNews | The case for nanoceramic PCBs in UV LEDs

UVA-based curing has been used in industrial applications for many years. However, the use of high-intensity discharge (HID) mercury vapour lamps as the UV source has limited the range of applications they were suitable for because the lamps, while effective, were large, fragile...
11
SEP
2017

Electronics Weekly | More heat than light for UVC LEDs

The old saying about an argument generating ‘more heat than light’ also sums up the thermal challenge in the growing market for UVC LEDs being used to disinfect medical instruments, water and other everyday consumer products, writes John Cafferkey of Cambridge Nanotherm. Read the...
01
SEP
2017

EPDT | Why thermal management is key to ensuring the success of UVC LED disinfection

LEDs are changing our understanding of how we can use light. In horticulture, LED lighting is transforming tower blocks and basements into urban farms, enabling farmers to produce food in the heart of our cities and towns. In local government, LEDs are driving down the cost and...
07
AUG
2017

LEDs Magazine | Examine the heated question of chip-scale packaging in the LED industry

The primary reason LEDs are sold as a packaged product is to protect the fragile bare die from damage. Standardized packaging also makes it far easier for manufacturers to work with LEDs on production lines. However, there is another consideration: LEDs are only around 40%...
26
JUL
2017

New Electronics | Solution to heat challenges in UV LED modules

Applications using ultraviolet (UV) light were first used back in the 1900s, but it was not until the 1940s that it was used on an industrial scale curing resins and inks and being deployed to sterilise and then disinfect medical equipment… Read the full article on the New...
25
JUL
2017

Medical Design Technology | The Next Step for UVC Disinfection in Hospitals

The use of UVC technology for sterilization and disinfection has been in mainstream use since the 1950s in medical sanitization and large-scale water sterilization application. These applications use mercury lamps to generate light with a wavelength of 253.7nm. This has a...
01
JUL
2017

eeNews Europe | The thermal implications of small, portable UV LED disinfection

LED technology is about to revolutionize the UVC disinfection market by enabling small, robust and portable applications that are not possible using traditional UVC technologies. However, as the technology gets smaller and the power gets higher one major challenge the industry...
13
JUN
2017

Chip Scale Review | Tackling the thermal challenge chip-scale packaging creates for high-power LEDs

While chip-scale packaging (CSP) has been around since the 1990s (and in production since the early 2000s), the LED industry has only adopted CSP approaches in earnest within the last few years. Read the full artcile by our Applications Manager, Dr Giles Humpston in the Chip...

Events

17
JAN
2018

NEPCON Japan | JP | 17th – 19th January 2018

We’ll be exhibiting at NEPCON Japan at Tokyo Big Sight on 17th to 19th Janaury 2018. We’ll release full details when we have them. In the meantime please visit the NEPCON Japan website for further information.
14
NOV
2017

Productronica | DE | 14th – 17th November 2017

We’re exhibiting at Productronica in Munich, Germany on the 14th to 17th November 2017. We’ll be in Hall B3 on stand 176. If you’re attending the event and would like to arrange a meeting with either our technical or sales team please email us. For more...
26
SEP
2017

LED Professional Symposium | AT | 26th – 28th September

We’re presenting “Thermal Management for Chip-Scale Packaged Lighting Modules” at LED Professional Symposium, in Bregenz, Austria 26 – 28th September. Our applications manager, Dr Giles Humpston, is presenting a paper on how the development of chip-scale packaged (CSP) LEDs...
01
MAR
2016

Strategies in Light | US | 1st – 3rd March 2016

Join us at Strategies in Light in Santa Clara Convention Centre on 1st to 3rd March 2016. Our roving Applications Manager, Dr Giles Humpston, will be presenting on “Using Nanoceramic to Enhance the Performance of LED Subsystems at Reduced Cost” in the Advanced...
18
NOV
2015

Lux Live | UK | 18th – 19th November 2015

We’re exhibiting at LUX Live at ExCeL in London’s docklands on the 18th and 19th November. This year LUX is co-located with both Strategies in Light Europe and the LED show. Come and find us at stand A46. Full details of the show are available here.
22
SEP
2015

LED Professional Symposium | AT | 22nd September 2015

We’re presenting our Nanoceramic substrates at the LED Professional Symposium in Bregenz in Austria in September. We’re also exhibiting so stop by stand E4 to have a chat. To find out more about the symposium click here.
14
SEP
2015

EMPC | DE | 14th September 2015

We’re at the IMAPS 20th European Microelectronics and Packaging Conference (EMPC) & Exhibition in Friedrichshafen at Lake Constance on the 14th and 15th September. For full details please visit the EMPC website.
06
JUL
2015

IMAPS HiTEN | UK | 6th – 8th July 2015

We’re presenting at the IMAPS High Temperature Electronics Network summer conference at Churchill College, 6th – 8th July. You can register to attend by clicking here. Details of our presentation are available here.
18
JUN
2015

EIPC Summer Conference | DE | 18th -19th June 2015

We’re presenting a paper on Nanoceramics at the EIPC Summer Conference in Berlin this June. Eric McLean will present on “Nanoceramic dielectric to expand the performance of metal-inboard PCBs” on the 18th June 10:00-10:25. To register for the event click here.
Main Menu